3.4.4 Original size detection sensor
Perform the following procedure to remove the Original
1. Remove the Scan glass and align cover. (3.4.1 ~ 3.4
2. Remove paper detection sensor [A] after removing sc
2 Remove paper detection sensor [A] after removing sc
3.4.5 Joint PBA
Perform the following procedure to remove the Joint P
Perform the following procedure to remove the Joint P
1. Remove the rear cover. (3.4.3)
2. Remove 5 screws and unplug 2 connectors.
Service Manual
SCX-8030/8040 series
3.Replacemen
nt Procedure
Size Detection Sensor from the Scan Unit.
.2)
crew and harness.
crew and harness
[A]
[A]
PBA from the Scan Unit.
PBA from the Scan Unit
3-1
15
SAMSUNG ELECTRONICS
Version 0.05