Samsung SCX-8030ND Series Service Manual page 383

● Code :
S4-3111
● Symptom / Cause :
Communication error between FCON card and Video
● Troubleshooting method :
1. Is the FCON card removed after installation?
Yes : Select "Fax device uninstall" on UI menu.
2. Did you replace the HDD / Video board / FCON car
Yes : Update the firmware for the new board.
3. Does the problem occur after updating the firmware
Yes :
A. Print the configuration report and check the fir
B. If all software versions are not normal, update
C. If the problem persists, replace the defective d
4. Check the connection between FCON card and Vid
Remove the FCON card and re-install it.
5. Replace the FCON card. 5 R l th FCON
6. If the problem persists, replace the Video board.
● Replacement part
- JC92-02148A : PBA-DUAL FAX CONTROL(FCON c
- JC92-02218A : PBA-MAIN (Video board)
Service Manual
SCX-8030/8040 series
7.Troubles
● Error message :
Fax System Failure
g p
d
shooting
:
#S4-3111 : Turn off then on.
board has occurred.
rd?
[ FCON card ]
e?
rmware version.
e the firmware again.
device. (HDD / Video board / FCON Card)
deo board.
card)
7-9 90
SAMSUNG ELECTRONICS
Version 0.05