● Code :
A1-7113
● Symptom / Cause :
Waste toner motor does not work properly.
● Troubleshooting method :
1. Turn the machine off. Check if there is any obstac
2. Remove the waste toner bottle and reinstall it aga
3. Try to test print without the waste toner bottle.
If the same error occurs, replace the waste toner m
If not, replace the waste toner bottle.
● Replacement part
JC31-00110C MOTOR-STEP
Service Manual
SCX-8030/8040 series
7.Troubles
shooting
● Error message :
Actuator Motor Failu
ure : #A1-7113. Please open/close door.
cles around waste toner bottle.
in.
motor and controller.
7-1
17
SAMSUNG ELECTRONICS
Version 0.05