Samsung SCX-8030ND Series Service Manual page 375

● Code :
S3-3111
● Symptom / Cause :
The MFP could not execute the copy and scan functio
● Troubleshooting method :
1. Is the MFP in lock up status?
Reboot the MFP.
2. Is the power supplied to the scan board?
Check the LED on the scan board.
3. Check the connection between Scanner and Main b
Is it connected properly?
Yes : Replace the Scanner board.
No : Reconnect the SATA cable between scanner a N R t th SATA
SATA cable
4. If the message does not disappeared after replacing
● Replacement part
JC92-02170A : PBA-SCAN
Service Manual
SCX-8030/8040 series
7.Troubles shooting
● Error message : :
Scan System Failure e : #S3-3111. Turn off then on.
ons. (Communication error with scanner board.)
board.
bl b t and Main board.
Sca anner board
g the scanner board, replace the Main board.
7-8 82
d M i b d
SAMSUNG ELECTRONICS
Version 0.05