Samsung SCX-8030ND Series Service Manual page 308

Hide thumbs Also See for SCX-8030ND Series:
Table of Contents

Advertisement

● Code :
A1-5113
● Symptom / Cause :
1. Toner motor is broken.
2. The relative connector is disconnected.
3. Deve joint board and main board are defective.
● Troubleshooting method :
1. Specially when toner cartridge is initial install time
seal of toner cartridge is removed.
2. Enter the diagnostic mode. Select the test routine.
Execute the toner motor test. If the motor works, ch
3. If the problem persists, remove the rear cover.
4. Open the engine board shield.
5. Check if the toner motor connector is connected pro
If the motor doesn't work, replace it.
6. Replace the Deve joint board or Engine board.
● Replacement part
JC31-00124A : MOTOR GEARED-T_SUPPLY
JC92-02302A : PBA-ENGINE (SCX-8030ND)
JC92-02221A : PBA-ENGINE (SCX-8040ND)
JC92-02339A : PBA-TONER CONNECTOR
Service Manual
SCX-8030/8040 series
7.Troubles
shooting
● Error message :
:
Actuator Motor Failu
ure : #A1-5113. Call for service if the problem persists.
(total printed pages is under 1,000 page), check if the
heck the connection.
operly. Reconnect it.
7-1
15
SAMSUNG ELECTRONICS
Version 0.05

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scx-8040nd series

Table of Contents