La San Marco 100 E/S PRACTICAL Use And Maintenance page 39

3. Installation
sported in the future.
heat generated during its operation.
heat.
3.1 Equipment provided
The machine packing contains the equipment kit, which includes the following items:
– filter cups with filter restraint ring
– filters for filter cups (single and double doses)
– blind filter for filter cup
– spouts for filter cups (single and double doses)
– press for ground coffee
– rubber tube with stainless steel mesh for water connection (water circuit - water softener)
– rubber drain hose with steel coil for water drain
– 3/8" nipples for hose connection to water supply tube
– cleaning brush for serving units
3.2 Water mains set-up
FEEDING LINE
Bring the water feeding tube (of at least 3/8" diameter) up to the machine and install an on-off valve (preferably of
3/8" ball type) that allows a rapid opening and closing operation.
DRAIN LINE
Provide an inspectable drainage pit on the floor connected with the sink drainage line, suitable for receiving
the machine gravity drainage tube. The drain tube must be positioned so that the water flows out freely, with-
out possibility for the pipe to clog up during the operation.
3.3 Water softener (optional)
customer's request.
of the components in the machine.
30
-
-
-
-
-