2-8 Compaq 1000 Series UPS Operation and Reference Guide
Starting the UPS
4. Replace the connector block in the REPO port.
PO W ER
R E M O
T E
P O W E
R O F F
Figure 2-4. Replacing the connector block
IMPORTANT: The remote switch must be in the OFF (open) position to enable power to
the output receptacles.
Starting the UPS for the first time requires the following procedures:
Checking the Battery Recharge Date label on the UPS shipping carton
Connecting the UPS to utility power via the input power cord
Connecting devices to the UPS
Powering up the UPS
Monitoring the automatic self-test to verify that the installation was
successful
RE M OT
E
OF F