Compaq 1000 Series Operation And Reference Manual page 25

Hardware
The UPS ships with one or more of the following:
Depth-adjustable fixed rails kit (rack-mountable models only)
Front handles and mounting brackets (2) (rack-mountable models only)
REPO terminal and connector block (rack-mountable models only)
Cable(s)
q
The T1000/T1500 and T1500j models ship with a 6-foot
UPS/computer interface cable, Compaq part number 295245-003,
and a non-detachable input power cord.
q
The T1000h/T1500h models ship with a 6-foot UPS/computer
interface cable, Compaq part number 295245-003; and two 6-foot
IEC to IEC power cords, Compaq part number 142263-001, for load
equipment power.
q
The R1500/R1500j models ship with a 12-foot UPS/computer
interface cable, Compaq part number 295245-004. The R1500 model
ships with a detachable input power cord. The R1500j model ships
with a 12-foot input power cord, Compaq part number 139867-006.
q
The R1500h model ships with a 12-foot UPS/computer interface
cable, Compaq part number 295245-004; and two 6-foot IEC to IEC
power cords, Compaq part number 142263-001, for load equipment
power.
All models ship with a computer interface cable. The computer interface cable
is not needed for normal operation. If power management of the UPS is
desired, connect the interface cable between the UPS communications port and
the serial port on the host computer.
IMPORTANT: If the UPS does not include a power cord that is suitable for your
application, contact an authorized Compaq service representative to obtain the
appropriate power cord. Please refer to the "Precautions for Power Products" section of
the Important Safety Information (included with the UPS kit).
Installation 2-3