Compaq 1000 Series Operation And Reference Manual page 53

Table 4-1
Configuration Parameters/LED Indicators
Parameter Parameter
(LED) Name
8 AC Input Failure
9 Sleep Mode
11-14 Reserved
15 Reset Defaults
1
Notes: Only one nominal utility voltage can be configured.
2
If model T1500j voltage defaults to 120, change the voltage to 100.
continued
LED 16 Explanation
Status
On Enables an audio alarm when the utility
(default) voltage is outside the UPS operating range.
Off Disables the audio alarm for this event.
On Enables Sleep mode.
Off Disables Sleep mode.
(default)
Reserved for future use.
On Defaults are restored
Off Configuration selected by the user
overrides defaults.
Configuration 4-5
2
.