Maintenance Plan; Maintenance Work; Cleaning Water Inlet Filter; Checking The Pump Oil Level - Nilfisk-ALTO POSEIDON 2-26 PORTABLE Operating Instructions Manual

EN
6 Maintenance
6.1

Maintenance plan

6.2.1 Cleaning water inlet fi lter
6.2.2 Checking pump oil level
6.2.3 Changing pump oil
6.2

Maintenance work

6.2.1 Cleaning water inlet
filter
6.2.2 Checking the pump oil
level

6.2.3 Changing the pump oil

40
After the fi rst 50
Weekly
operating hours
Max.
Min.
Every six months
or 100 operating As required
hours
A water filter is fitted on the
water inlet to prevent large par-
ticles of dirt from entering into
the pump.
1. Unscrew the quick-release
connection.
2. Remove the fi lter and rinse
it. Replace damaged fi lter.
Replace damaged fi lter.
1. Check whether the oil level
is between the minimum and
maximum marks. If neces-
sary, add oil (see chapter
8.3 for type of oil).
1. Unscrew the oil drain plug
(1) on the pump housing
and dispose of the old oil in
accordance with the dispos-
al regulations.
2. Fill with fresh oil and re-
mount the oil drain plug.
Check the oil level.
Oil grade and capacity see
chapter '8.3 Technical Data'.