Pace IntelliHeat ST 30 Operation And Maintenance Manual page 6

Feature
A Analog control knob
B THC fine control
C Power switch
D Analog control LED
E Power Receptacle
F Program button
G Up arrow button
H Down arrow button
I Digital control LED
J Digital display
K Vacuum inlet
L Pressure control valve / port Pressure / airflow connection and control for TJ-85 handpiece.
M Power module LED
N Power module jack
O Ground jack
P ISB connection
Q Power inlet with fuse
R Auto off switch
S Shop air connection
T Foot pedal connection
©2012 PACE Inc., Southern Pines North Carolina
Description
Regulates tip temperature on ST 30, ST 65, & ST 75 power supplies.
For fine adjustment of true tip temperature (Tip heater Cartridge handpieces only).
On /off control of power supply.
Indicates status of power supply.
Front panel connection of handpiece.
For access and confirmation of program menu functions.
Increase set temperature and scroll through program menu functions.
Decrease set temperature and scroll through program menu functions.
Indicates status of power supply.
Displays temperature setting and menu functions.
Vacuum connection for SX-90, TP-65, & TP-100 Handpieces.
Indicates status of power supply.
Allows user to increase or decrease performance level using individual power
modules.
For ground system to static safe work area.
Connection for Instant Set Back cubby.
Connection for IEC power cord and fuse replacement.
Activates auto off feature
Connection for regulated air supply (ST 65 power supply only)
Optional control for pressure / vacuum handpiece activation. (Required for TJ-85)
All Rights Reserved Page 6 of 20