Part 6: Before You Call The Service Centre - Philco PEI 902 User Manual

PART 6: BEFORE YOU CALL THE SERVICE CENTRE

If the appliance is not working as it should check the following recommendations for resolving the most
common problems.
If the problem persists or it is not included in the table below, turn off the appliance and disconnect it from the
power socket and contact an authorised service centre.
Problem
The range hood is not working.
The lights are not working.
Exhaust power is weak.
The range hood does not extract the
air directly out (for models without an
exhaust).
ATTENTION:
Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend to
leave the range hood running a few minutes longer than the stove to ensure that all odours are extracted.
EN - 16
Copyright © 2015, Fast ČR, a. s.
Solution
Check that the power plug is properly inserted in a properly
grounded power socket with the parameters 220 – 240 V ~ 50 Hz.
Check that the motor power switch is in the "On" position.
Check that the power plug is properly inserted in a properly
grounded power socket with the parameters 220 – 240 V ~ 50 Hz.
Check that the motor power switch is in the "On" position.
Check whether the light bulb or fl uorescent tube is broken.
Check whether the aluminium fi lters are dirty.
Check the air outlet, it should be open.
Check whether the carbon fi lter is not too dirty.
Check whether the aluminium fi lters are dirty.
Check whether the carbon fi lter is not too dirty.
02/2015