Philco PEI 902 User Manual page 12

7) Removing the separation plate
To remove the separation plate hold the plate in the appropriate points on the left and right and pull
downwards.
8) Connecting the control unit to the motor unit
Align the hanging hooks on the control unit with the appropriate holes for the hanging hooks on the
motor unit and join together using screws (3.5 x 9.5)
9) Wiring connection
Connect the 220 V socket for the power cord with an appropriate motor socket. Insert the aluminium fi lters
when the connection is performed.
EN - 10
Copyright © 2015, Fast ČR, a. s.
Hole for the hanging hooks on the motor unit
Hanging hook
02/2015