Kenmore 501-80002 Owner's Manual page 15

O
perating Your Dryer
5. Close the Door.
Before you close the door, make sure fabrics are well
placed inside and that foreign objects are not caught
around door.
6. Select the Drying Cycle you want.
You can choose a cycle by turning the program
control knob until the required program reaches to
its indicator. If you only press the Start/Pause button
without choosing any cycle, the dryer will proceed
with the standard program. [ Please refer to
following Cycle Selection table (page 13) for
detailed information ]
7. Press the Start button.
You can hear drum rotating.
8. After operation is completed, open
the door and remove the laundry.
Careful! The drum inside could be still hot.
(Operation time varies depending on your cycle
selection or options.)
9. Clean the Lint Filter.
The lint filter should be cleaned after each load.
10. Turn off the Dryer.
Press the Power button.
Note
- Be careful the filter isn't torn when using a
vaccum cleaner. If there is a little residue buildup
on filter, you can scrub the lint screen with a soft
brush to remove.
- If you want to open the door while dryer is
operating, press the Start/Pause button first, wait
until drum completely stops and then open the
door.
F
Select the
desired
cycle.
Take out
the laundry.
Clean the
door lint
filter.
15