Kenmore 501-80002 Owner's Manual page 19

C
aring For Your Dryer
Change the Bulb
The bulb itself could be very hot when the dryer just
finishes its operation. So before changing the bulb,
be sure that the inside of the drum is cool down.
1. Open the door, put a hand into the drum and
grasp the bulb cover.
2. With bulb held by hand gently, turn the bulb cover
clockwise.
3. Sepearate the bulb cover from the socket
housing.
!
WARNING!
Power cord must be unplugged before this
work to avoid danger of electric shock.
4. Remove the current bulb turning it to Counter
clockwise. Be careful that it does not fall off.
5. Replace in the new bulb in the reverse
unscrewing direction.
Note
No any special tool is needed for this work.
All steps can be done by hand.
F
19