Toyota 2006 Tundra Owner's Manual page 84

The seat belt pretensioner system con-
sists mainly of the following components
and their locations are shown in the il-
lustration.
1. Front airbag sensors
2. Front passenger occupant classification
indicator light
3. Front passenger occupant classification
system (ECU and sensors)
4. Seat belt pretensioner assemblies
5. Front passenger's seat belt
switch
6. Airbag sensor assembly
7. SRS warning light
The seat belt pretensioners are controlled
by the airbag sensor assembly. The airbag
sensor assembly consists of a safing sen-
sor and airbag sensor.
When the seat belt pretensioners are acti-
vated, an operating noise may be heard
and a small amount of non−toxic gas may
be released. This does not indicate that
a fire is occurring. This gas is normally
harmless.
Once the seat belt pretensioners have
been activated, the seat belt retractors
remain locked.
CAUTION
Do not modify, remove, strike or open
the seat belt pretensioner assemblies,
airbag sensor or surrounding area or
wiring. Failure to follow these instruc-
tions may prevent the seat belt pre-
tensioners from activating correctly,
cause sudden operation of the system
or disable the system, which could
result in death or serious injury. Con-
buckle
sult your Toyota dealer about any re-
pair and modification.
'06 TUNDRA_U (L/O 0508)
Do not perform any of the following
changes
Toyota dealer.
interfere with proper operation of the
seat belt
cases.
z Installation
such as a mobile two−way radio,
cassette
disc player
z Repairs on or near the front seat
belt pretensioner assemblies
z Modification of the suspension sys-
tem
z Modification of the front end struc-
ture
z Attachment of a grille guard (bull
bar, kangaroo bar, etc.), snowplow,
winches or any other equipment to
the front end
z Repairs made on or near the front
fenders, front end structure or con-
sole
2006 TUNDRA from Oct. '06 Prod. (OM34458U)
NOTICE
without consulting your
Such changes can
pretensioners in some
of electronic devices
tape player or compact
73