Toyota 2006 Tundra Owner's Manual page 159

CAUTION
When using the lower anchorages
D
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
Push and pull the child restraint
D
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
After securing the child restraint
D
system, never slide or recline the
seat.
148
'06 TUNDRA_U (L/O 0508)
—Installation with child
restraint lower anchorages
(access cab models)
Lower anchorages for the child restraint
systems complying with the FMVSS225
or CMVSS210.2 specifications
installed in the rear seat.
The anchorages are installed in the gap
between the seat cushion and seatback of
the outsides of the rear seat as shown in
the illustration.
Child restraint systems complying with the
FMVSS213 or CMVSS213 specification
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
are
Canada only
Type A
2006 TUNDRA from Oct. '06 Prod. (OM34458U)