Toyota 2006 Tundra Owner's Manual page 37

MODEL/FCC ID: BAB237131−056
CAN: 2024 102 1519
ASSEMBLED IN U.S.A.
This complies with Part 15 of the FCC
rules. Operation is subject to the follow-
ing two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, includ-
ing interference that may cause unde-
sired operation.
26
'06 TUNDRA_U (L/O 0508)
—Locking and unlocking
doors
Locking operation
Unlocking operation
To lock and unlock all the doors, push
the switches slowly and securely. At
this time, the indicator light on the
transmitter flash once.
To lock: Push the "LOCK" switch. All the
doors are locked simultaneously. At this
time one beep will be heard, and the tail
lights and front side marker lights will
flash once.
Check to see that the doors are securely
locked.
If any door is not securely closed, locking
cannot be performed by the
switch and a beep will sound continuously
for 5 seconds. However, if the key is in
the ignition, a beep will not sound.
To stop the beep, close all the doors se-
curely or push the "UNLOCK" switch.
To unlock: Push the "UNLOCK" switch
once to unlock the driver's door alone.
Pushing the switch twice within 3 seconds
unlocks all the doors simultaneously. Each
time the "UNLOCK" switch is pushed, two
beeps will be heard, and the tail lights
and front side marker lights will flash
twice.
2006 TUNDRA from Oct. '06 Prod. (OM34458U)
"LOCK"