Toyota 2006 Tundra Owner's Manual page 221

NOTICE
z Do not use liquid sealants for a flat
tire as tire pressure warning valve
and transmitter will be damaged.
z When the tires must be repaired or
replaced, have them repaired or re-
placed by the nearest Toyota dealer
or an authorized tire dealer. The
tire pressure warning valves and
transmitters will be affected by the
installation or removal of tires.
210
'06 TUNDRA_U (L/O 0508)
Without tachometer
With tachometer
IF THE TIRE PRESSURE WARNING
LIGHT BLINKS...
If the tire pressure warning light blinks
when the ignition switch is turned to
the "ON" position, the tire pressure
warning system is not working properly.
The system will be disabled in the follow-
ing conditions:
(When the condition becomes normal, the
system will work properly.)
If tires not equipped with tire pressure
D
warning valves and transmitters are
used.
If the ID code on the tire pressure
D
warning valves and transmitters is not
registered.
If electronic devices or facilities using
D
similar radio wave frequencies
nearby.
If a radio set at similar frequencies is
D
in use in the vehicle.
If a window tint that affects the radio
D
wave signals is installed.
If there is a lot of snow or ice on the
D
vehicle, in particular around the wheels
or wheel housings.
If non−genuine Toyota wheels are used.
D
2006 TUNDRA from Oct. '06 Prod. (OM34458U)
are