4. Put in a new transmitter battery with
positive (+) side up.
Place the rubber gasket back on the
transmitter.
Then
close
the
transmitter
case securely.
NOTICE
z Make sure the positive side and
negative side of the transmitter bat-
tery are faced correctly.
z Do not replace the battery with wet
hands. Water may cause unexpected
rust.
'06 TUNDRA_U (L/O 0508)
z Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.
z Be careful not to bend the electrode
when inserting the transmitter bat-
tery and that dust or oils do not
adhere to the transmitter case.
z Close the transmitter case securely.
After replacing the battery, check that the
transmitter operates properly. If the trans-
mitter still does not operate properly, con-
tact your Toyota dealer.
Wireless remote control
(double cab models)—
1. "LOCK" switch
2. "UNLOCK" switch
3. "PANIC" switch
2006 TUNDRA from Oct. '06 Prod. (OM34458U)
29