Toyota 2006 Tundra Owner's Manual page 426

—Raising your vehicle
Standard cab models
Access and double cab models
'06 TUNDRA_U (L/O 0508)
6. After making sure that no one
is in the vehicle, raise it high
enough so that the spare tire
can be installed.
Remember you will need more ground
clearance when putting on the spare
tire than when removing the flat tire.
Standard cab models—To raise the
vehicle, insert the jack handle into the
jack (it is a loose fit) and turn it clock-
wise. As the jack touches the vehicle
and begins to lift, double−check that
it is properly positioned.
Access cab and double cab models—
To raise the vehicle, insert the jack
handle extension into the jack (it is
a loose fit) and turn it clockwise with
the handle, making sure the handle
remains firmly fitted onto the jack
handle extension. As the jack touches
the vehicle and begins to lift, double−
check that it is properly positioned.
CAUTION
Never get under the vehicle when
the vehicle is supported by the
jack alone.
2006 TUNDRA from Oct. '06 Prod. (OM34458U)
415