Armrest; Seat Heaters - Toyota 2006 Tundra Owner's Manual

Armrest

Non−split bench seat
Split bench seat
62
'06 TUNDRA_U (L/O 0508)
Separate seat
To use the armrest, do this.
Non−split and split bench seat—Pull the
armrest out as shown in the illustration.
Separate seat—Pull the armrest down as
shown in the illustration.
NOTICE
To prevent damage to the armrest,
avoid putting heavy loads on it.

Seat heaters

To turn on the seat heater, push the
switch ("L" switch for the left front
seat and "R" switch for the right front
seat).
At this time, the indicator light will illu-
minate to indicate the seat heater is
operating.
The seat heater switches have the follow-
ing positions.
"HI"—High heating temperature
"LO"—Low heating temperature
The key must be in the "ON" position to
operate seat heaters.
Pushing lightly on the opposite side will
turn it off.
2006 TUNDRA from Oct. '06 Prod. (OM34458U)