Garage Door Opener - Toyota 2006 Tundra Owner's Manual

—Garage door opener

318
'06 TUNDRA_U (L/O 0508)
The garage door opener (
Universal Transceiver) is manufactured
under license from HomeLink R
be programmed to operate
doors, gates, entry doors, door locks,
home lighting systems, and security
systems, etc.
(a) Programming the HomeLink R
The HomeLink R in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
HomeLink R , install a new battery in the
hand−held transmitter prior to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away from the
HomeLink R during the programming pro-
cess.
For Canadian users, follow the procedure
in "Programming an entrance gate/pro-
gramming all devices in the Canadian
market".
1. Decide which of 3 HomeLink R
you want to program. Push and hold
down one of the buttons until the indi-
cator corresponding to the selected
channel begins to flash.
R
and can
garage
Hand−held
garage
transmitter
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink
Keep the indicator light on the HomeLink
in view while programming.
buttons
2006 TUNDRA from Oct. '06 Prod. (OM34458U)
HomeLinkr
25 to
75 mm
(1 to 3 in.)
R .
R