Toyota 2006 Tundra Owner's Manual page 328

—Before using the
multi−information display
Operate the multi−information display
with the ignition switch on.
When the ignition switch is turned to
"ON", the last previously used mode dis-
played just before the ignition switch is
turned off will appear.
When the instrument panel lights
turned on, the brightness of the display
will be reduced.
'06 TUNDRA_U (L/O 0508)
"E/M" button
This button is used to switch between
English/U.S. Customary
metric units of the outside temperature
display.
Each time you push this button, the dis-
are play switches. This is also linked to the
multi−information display. The display vari-
ations are as follows;
Indication
English/U.S. Customary
System (E)
Metric (M)
The initial mode will be English/U.S. Cus-
tomary System units, however, if the unit
is switched to metric and the ignition
switch is off, it will display metric units
when the ignition switch is turned to "ON".
"MODE" button
This button is used to select the item.
System and
Every time you push the "MODE" button,
the display toggles.
For more details, see "—Outside tempera-
ture display" in this Section.
Do not adjust the display while the
Outside
vehicle is moving. Be sure to adjust
temperature
the display only when the vehicle is
stopped.
_F
_C
2006 TUNDRA from Oct. '06 Prod. (OM34458U)
CAUTION
317