Setting The Timer - Tiger JKT-B10U Operating Instructions Manual

7

Setting the Timer

2
Using the Timer function (Timer 1 /
Timer 2)
You can preset the time that you want cooking
to be actually completed.
• Select either "Timer 1" or "Timer 2" and set the
desired completion time. The start of cooking will
be automatically adjusted so that the operation is
completed at the preset time.
• Each timer can be set to different times. e.g.
"Timer 1" for breakfast and "Timer 2" for dinner.
• The preset timer settings will be stored in
memory.
● Example setting: If "Timer 1" is set to 1:30 PM,
cooking will be completed at 1:30 PM.
1
Check the present time.
Blinks
• See p.36 for the procedure to set the present
time.
2
Press the [ ] [ ] key
to select the desired
menu.
The symbol will blink
while the menu is being selected.
22 22
When cooking
rinse-free rice,
1
press the key twice.
6
4
3, 5
Blinks
• Confirm that the Keep Warm lamp is off.
• It is not necessary to press the [Menu] key if
the desired menu is already selected.
3
If you selected the "Porridge"
menu, use the [Hour] and [Min]
keys to set the desired cooking
time.
• Each time the [Hour] key is pressed, the
set time will increase by 5 minutes. Each
time the [Min] key is pressed, that time will
decrease by 5 minutes.
• The cooking time can be set to any 5-minute
increment between 40 and 90 minutes.
Increases
by 5 min.
• The default setting is for 60 minutes. Adjust
as desired.
4
Press the [Timer] key to
select either "Timer 1"
or "Timer 2".
The selected setting will switch back
and forth between "Timer 1" and
"Timer 2" each time the [Timer] key is pressed.
Both the Timer lamp and the displayed "Timer
1" or "Timer 2" will blink.
Blinks
• The previously preset time will be displayed.
It is not necessary to set the timer again if the
desired completion time is already displayed.
Off
Decreases
by 5 min.
Blinks