Assembling the Electronic Board
12
Remove the roller and paper.
Bend and remove the roller (➊), then remove
the paper with tape (➋). (The roller and paper
are needed for repacking.)
13
Attach the upper frame cover.
1) Align the upper frame cover with the metal
fittings on the left and right ends, then rotate it
in the direction of the arrows.
10
2
1
2
Metal fitting
2) Be sure the back of the frame cover (A) is fit to
the frame of the screen unit and push down
the two rivets.
A
3) Place the wrench in the wrench holder.
Wrench