Repacking - Panasonic UB-5325 Installation Manual

Repacking

Perform Assembly Steps 2 through 15 on pages 4 - 11 in reverse to repack the electronic board and accessories.
Use the joints to fasten the shipping box.
Caution
• When handling the screen unit, grasp the metal frames on both sides of the screen.
Do not grasp the screen film surface, as this may scratch it.
Note
• To release the two rivets at step 13-2 on page 10, turn the rivets counterclockwise with a screw driver (➊). [The pin
of the rivets will be raised (➋).]
14
2
1