Panasonic UB-5325 Installation Manual page 11

14 Attach the lower frame cover.
1) Align the lower frame cover with the metal
fittings on the left and right ends (➊), then
lower it in the direction of the arrows (➋).
2
1
2) Lift the lower frame cover up (➊) and fasten it
with the two supplied wing bolts (➋).
1
2
2
1
Metal fitting
1
2
Assembling the Electronic Board
15 Connect the power cord.
1) Securely fit the supplied power cord into the
AC inlet on the printer unit.
2) Fit the power cord into the cable holder.
Cable holder
11