Reset Speakerphone - AT&T 8434 Quick Reference

Voice terminal

Hide thumbs Also See for 8434:

Table of Contents

To change a regular call into a priority call (when you hear a busy tone or a

ringback tone), do the following:

Do one of the following:

Press

You continue to hear ringback tone.

The ringing at the called extension changes to priority ringing.

Reset Speakerphone

You can adjust the speakerphone to the surrounding room acoustics to provide

optimal performance. Use the Reset Speakerphone feature for the following

reasons:

When you move your voice terminal to another location (even in the

same room).

Whenever the red light next to

NOTE:

You may also use this feature when you are on a call in the unlikely event

your speakerphone makes a squealing noise during the call. Your speak-

erphone will adjust itself to normal for that call (no tones will be heard). If

there has been an interruption in power (such as the system has just

been powered up, or you have connected the voice terminal at another

location), the light next to

phone.

To adjust the speakerphone, do the following:

While on-hook, press

Press

Speaker

The speakerphone resets.

, and then press PCall.

Priority

Speaker

Shift

is fluttering.

flutters until you reset the speaker-

Issue 1

March 1996

Table of Contents