AT&T 8434 Quick Reference page 16

2. Dial the number of the new party, and wait for an answer.
You can privately discuss the call with the new party at this time. If
you want to establish the conference call, continue with Step 3.
If there is no answer or the line is busy, press the held call appear-
ance button to return to the held call.
3. Press
All parties are connected on the conference call.
4. Repeat Steps 1 through 3 to add more parties to the conference call.
To create a conference call when you have a call on hold and you have a
second active call, do the following:
1. Press
The active call goes on hold, and you hear a dial tone.
2. Press the call appearance button of the call originally on hold (the first
call).
You are reconnected to your first caller.
3. Press
All three parties are now connected in a conference call.
To drop the last party added to a conference call:
1. Press
The last party added to the conference call is dropped from the
call.
16 Issue 1 March 1996
again.
Conf
.
Conf
again.
Conf
.
Drop