AT&T 8434 Quick Reference page 10

To use the Automatic Callback feature, do the following:
1. After you hear a ringback tone or a busy tone, do one of the following:
a. Press
b. Press
You hear a confirmation tone.
2. Go on-hook.
When the called telephone becomes available again, your tele-
phone rings with priority ringing (a 3-burst ringback).
3. Go off-hook.
You hear a ringback tone and the call is placed to the number you
originally called.
If you decide that you want to cancel the Automatic Callback request, do one of
the following:
1. While on-hook, do one of the following:
a. Press
b. Press
2. Go off-hook and dial the Automatic Callback deactivation feature access
code _____.
Bridging
You may have a "bridged" call appearance for someone else's voice terminal
assigned to your voice terminal. When you press this call appearance, it oper-
ates as if you were at that person's voice terminal. You can use this bridged call
appearance to answer calls, make calls, or bridge on to an existing call.
10 Issue 1 March 1996
, and then press AutCB.
Menu
.
Auto Callback
, and then press AutCB.
Menu
.
Auto Callback
0