Tools You Will Need; Mounting Space - RCA RMW1636SS Owner's Manual

TOOLS YOU WILL NEED

# 1 and #2 Phillips screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles

MOUNTING SPACE

16-½ "
66" or more
from the floor
to the top of the
microwave
Installation Instructions
Pencil
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Level
30"min.
2"
Backsplash
Ruler or tape measure
and straight edge
3
Electric drill with / ", ½"
16
5
and / " drill bits
8
Stud finder or Hammer (optional)
NOTES:
• The space between the cabinets must be
Bottom edge of
cabinet needs
30" wide and free of obstructions.
to be 30" or
• If the space between the cabinets is greater
more from the
cooking
than 30", a Filler Panel Kit may be used to fill
surface
in the gap between the microwave oven and
the cabinets. Your Owner's Manual contains
the kit number for your model.
• This microwave oven is for installation over
ranges up to 36" wide.
• If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
• When installing the microwave oven
beneath smooth, flat cabinets, be careful
to follow the instructions on the top
cabinet template for power cord
clearance.
7
Carpenter square
(optional)
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Duct and masking tape