RCA RMW1636SS Owner's Manual page 36

B4
ADAPTING MICROWAVE BLO
.
FOR OUTSIDE BACK EXHAUST
(cont.)
3.
Remove "Parts A"with Nipper or Scissors.
4.
Rotate blower unit counterclockwise 180°.
Before Rotation
Back of
Microwave
Installation Instructions
WER
Part"A"
After Rotation
Back of
Microwave
18
5.
Place the blower unit back into the opening.
AFTER: Fan Blade
Openings Facing Back
Openings Facing Back
End B
CAUTION: Do not pull or stretch the blower unit
wiring. Make sure the wires are not
pinched.
NOTE: The blower unit exhaust openings should
match exhaust openings on rear of microwave
oven.
6.
Secure the blower unit to the microwave with the
screw from Step 1.
7.
Replace the blower plate in the same position as
before with the screw.
8.
Attach the exhaust adaptor to the rear of the oven
by sliding it into the guides at the top center of the
back of the oven.
Adaptor
Guide
Push in securely until it is in the lower locking tabs.
Take care to assure that the damper hinge is installed
so that it is at the top and that the damper swings
freely.
End A
Blower Plate
Back of
Microwave
Blower Motor
Screw
Back of
Microwave
Guide
Locking Tabs