Connecting The Lan Cable - Mitsubishi Electric AE-200A Installation Manual

7-3. Connecting the LAN cable

Connect the LAN cable to the LAN1 port on the AE-200/AE-50. (The LAN2 port is unused.)
● The LAN cable is not supplied. Use a category 5 or above straight LAN cable.
● Use a switching HUB.
● The maximum distance between the switching HUB and AE-200/AE-50 is 100 m (328 ft).
LAN2
LAN1
Note
● LAN must be installed before the unit installation. Route the LAN cable to the AE-200/AE-50 in the same way as the M-NET
transmission cables.
● When connecting the AE-200/AE-50 to an existing LAN, consult the system administrator to decide the IP address. Change
the IP address setting before connecting the LAN cable to the LAN1 port.
● To prevent unauthorized access, always use a security device such as a VPN router when connecting the AE-200/AE-50 to
the Internet.
WT07137X01
29