2.8.3
HDD LED Connector (JFP1 Pins 2 & 5)
You can connect an LED to connector JFP1 to indicate when the HDD is active.
2.8.4
Reset Connector (JFP1 Pins 9 & 12)
Many computer cases offer the convenience of a reset button.
2.8.5
SNMP Connector (JFP1 Pins 8 & 11)
SNMP connector could connect with "SAB-2000" remote control board to monitor
ASMB-913I through the super IO chip.
2.8.6
Case Open (JCASE1)
A Chassis Intrusion header is located at JCASE1 on the motherboard. Attach the
appropriate cable from the chassis to be informed of a chassis intrusion when the
chassis is opened. The default function is disabled and Pin 1-2 is bridged by a jumper
cap.
+
2
5
9 12
8 11
(Data) (CLK)
21
1
2
ASMB-913I User Manual