Decorative Bay Window & Screen; Remote Controls - Majestic 33BDVR Installation Instructions And Homeowner's Manual

Either remove the top and bottom brass window
trims or take care not to scratch them during the
installation of the screen kit.
1. Slide the tabs on the top edge of the window screen
assembly up into the slots in the underside of the top
rail of the window frame assembly.
2. With the tabs in the slots, place the screen down
against the glass.
3. Slide the screen down the glass until the bottom
edge of the screen sits in the gap between the
bottom rail of the window frame assembly and the
window doors.
To remove the screen for glass cleaning reverse the
installation procedures.
Window Frame
Assembly
Fig. 55 Front window screen.
Decorative Bay Windows
Bay window kits are available for the 33BDVT/
33BDVR, 36BDVT/36BDVR & 39BDVT/39BDVR
model appliances.
When fitting the Bay Window Kits the
original window frame assembly must
remain in place. The Bay Window kit is
fitted over the existing front glass.
Installation Refer to Figure 56
1. Remove the upper and lower brass window trims.
2. Remove the existing bottom louvre assembly
complete with the hinges.
3. Remove the top louvre assembly.
4. Assemble the Bay Window Kit according to the
instructions supplied with the kit.
5. Place the 2 pieces of ceramic refractory along the
base of the bay window.
6. Hang the Bay Window Assembly over the existing
window frame assembly.
7. Reinstall the upper louvre assembly.
Do not remove the existing window frame
assembly.
10003357
Front Window Screen
FP1233
BDVR Series Direct Vent Gas Fireplace
Top Louvre
Ceramic
Refractory
Bottom Brass
Trim
Fig. 56 Bay window isntallation.
Bay Window Screen
Bay window Screen kits are available for the 33BDVT/
33BDVR & 36BDVT/36BDVR model appliances.
Do not remove existing window frame
assembly! Remove all plastic from brass
trims.
1. Let the fireplace cool down if it has been operating.
2. Remove existing top louvre from fireplace by lifting
up and pulling out.
3. Hang Bay Window Screen assembly over top of the
existing glass frame.
Fig. 57 Bay window screen assembly.

Remote Controls

Optional remote control units are available to control
different functions of the appliances
Model Function/s Controlled
MRCI ON/OFF
MRC2 ON/OFF and Temperature
MRC3 ON/OFF and Temperature
control with a digital display
and programmable 24 hour clock
IMT Wall mounted thermostat control
(must be used in bedroom installations)
Bay
Window
Frame
Ceramic
Refractory
Spacers
Bottom
Louvre
Assemblies
FP1234
Screws
CFM178
37