Decorative Bay Windows; Bay Window Screen; Remote Control Units - Majestic 33BDVT Installation Instructions And Homeowner's Manual

BDVT Series Direct Vent Gas Fireplace
Either remove the top and bottom brass window trims
or take care not to scratch them during the installation
of the screen kit.
1. Slide the tabs on the top edge of the window screen
assembly up into the slots in the underside of the
top rail of the window frame assembly.
2. With the tabs in the slots, place the screen down
against the glass.
3. Slide the screen down the glass until the bottom
edge of the screen sits in the gap between the
bottom rail of the window frame and the window
doors.
To remove the screen for glass cleaning reverse
the installation procedures.
Window Frame
Assembly
Fig. 53 Front window screen.

Decorative Bay Windows

Bay window kits are available for the 33BDVT/33BDVR,
36BDVT/36BDVR & 39BDVT/39BDVR model
appliances.
When fitting the Bay Window Kits the
original window frame assembly must
remain in place. The Bay Window kit will
fit over the existing window frame
assembly.
Installation
1. Remove the upper and lower brass window trims.
2. Remove the existing bottom louvre assembly
complete with the hinges.
3. Remove the top louvre assembly.
4. Assemble the Bay Window Kit according to the
instructions supplied with the kit.
5. Place the 2 pieces of ceramic refractory along the
base of the bay window. (Fig. 54)
6. Hang the Bay Window Assembly over the existing
window frame assembly.
7. Re-install the upper louvre assembly.
Do not remove the existing window
frame assembly.
36
Front Window Screen
FP1233
Top Louvre
Ceramic
Refractory
Bottom
Brass Trim
Fig. 54 Bay window installation.

Bay Window Screen

Bay Window Screen Kits are available for the 33BDVT,
36BDVT, 39BDVT & 43BDVT model appliances.
Do not remove existing window frame
assembly! Remove all plastic from brass
trims.
1. Let the fireplace cool down if it has been operating.
2. Remove existing top louvre from fireplace by lifting
up and pulling out.
3. Hang Bay Window Screen Frame Assembly over top
of existing window frame assembly.
CFM178
Fig. 55 Bay window screen assembly.
Remote Controls
Optional remote control units are available to control
different functions of the appliances
Model Function/s Controlled
MRCI ON/OFF
MRC2 ON/OFF and Temperature
MRC3 ON/OFF and Temperature control
with a digital display and
programmable 24 hour clock.
IMT Wall mounted thermostat control
Bay
Window
Frame
Ceramic
Refractory
Bottom
Louvre
Assemblies
Screws FP1234
10003358