Eco Plus; Call Barring; Switch Call Barring On/Off; Set A Number To Be Barred - Motorola IT.6.1X User Manual

e
4. Scroll to the required range either House,
To switch ECO mode off select Off.
5. Press to return to standby.
A confirmation beep is emitted and when the range is set and the
display.
8.12

ECO PLUS

When ECO PLUS is activated and the unit has been idle for 1 minute the transmitted
power between the handset and the base will stop, an incoming call or pressing any key
will activate the unit and it will revert back to the normal mode. This feature is set to
default.
M
1. Press , scroll
d
2. Scroll to ECO Mode
3. ECO mode is displayed, press
n
u d
4. Press or to select
5. Press to return to standby.
A confirmation beep is emitted and when ECO plus is set to On and the
the display.
8.13

Call barring

Prevent certain numbers from being dialled from your IT.6X. Store up to four specific
numbers, each up to 4 digits – for example, international or local prefixes.
Bypass Call barring by switching the setting to Off.
NOTE
If you switch Call barring on,
mode.
M

8.13.1 Switch call barring on/off

1. Press , scroll
d
2. Scroll to Call
3. Enter the master PIN (default setting 0000) and press
e
4. Mode is displayed. Press
u d
5. Press or to select
6. Press to return to standby. You can now set the number. (See below)
M

8.13.2 Set a number to be barred

1. Press , scroll
d
2. Scroll to Call
3. Enter the master PIN (default setting 0000) and press
Advanced settings
d
to Advanced Set and press
M
and press
M
.
On or Off. Press
Barr Mode On
d
to Advanced Set and press
M
Barring. Press .
M
.
On or Off. Press
d
to Advanced Set and press
M
Barring. Press .
Apartment or Room
M
.
.
M
to confirm.
will be displayed on your screen in standby
M
.
M
.
M
to confirm.
M
.
M
.
M
and press .
icon shows on the
Off
icon shows on
by
33