AT&T 1080 User Manual page 57

PLAY ALL MSGS
MESSAGE #03
PAUSE
CENTRAL MSGS
20 MESSAGES
REMOVE ALL MSGS
CENTRAL MSGS
20 MESSAGES
REMOVE ALL?
Answering system operation
Central message playback
Information about messages
• When playback begins, you will hear the total
number of new or all messages.
• Before each message, you will hear the day
and time it was received. The message number
currently playing will be displayed on the screen.
• After the last message, you will hear "End of
messages."
Options during message playback
• To adjust the playback volume, press
[ VOLUME].
• To skip to the next message, press [ ].
• To go back to the previous message, press
[ ] within 3 seconds of the message playing. To
repeat the message currently playing, press [ ]
after 3 seconds of the message playing.
• To pause playback (up to 30 seconds), press
[ENTER], and press again to resume.
• To delete the message currently being played
back, press [REMOVE].
• To stop playback and exit, press [DTAD].
To delete all central messages
1. Press [DTAD] while the telephone is idle (not
during a call or during message playback).
2. Press [ ] or [ ] until you see CENTRAL MSGS.
Press [ENTER].
3. Press [ ] or [ ] until you see REMOVE ALL
MSGS. Press [ENTER].
4. The screen will display REMOVE ALL? Press
[ENTER] within 3 seconds to delete all
messages, or press [DTAD] to exit and leave all
messages intact.
80