AT&T 1080 User Manual page 44

DTAD SETUP
= 111
REMOTE CODE
DTAD SETUP
ON
MESSAGE ALERT
Answering system operation
DTAD setup
REMOTE CODE
Select a three-digit number to allow remote access
from another telephone (away from your home,
page 59 of the installation guide) and internal
access from the SYS EXT telephones (See 1070 or
1040 user's manual for details). This code is 111
by default.
1. Press [ENTER].
2. Press [ ] or [ ] until you see DTAD SETUP. Press
[ENTER].
3. Press [ ] or [ ] until you see REMOTE CODE.
4. Press and hold [ ] to delete the current code.
Press the dial pad keys to enter a three-digit
remote access code (000-999).
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
MESSAGE ALERT
Turn the audible message alert on or off.
If the message alert tone is on, the telephone
will beep every 30 seconds when there are new
private or central messages.
1. Press [ENTER].
2. Press [ ] or [ ] until you see DTAD SETUP. Press
[ENTER].
3. Press [ ] or [ ] until you see MESSAGE ALERT.
4. Press [ ] or [ ] to choose ON or OFF.
5. To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
67