Removing And Installing Cover And Padding For Individual Rear Seat - Audi A8 2003 Workshop Manual

♦ Awl -V.A.G 1636 A-
1 - Awl -V.A.G 1636A-
2 - Fastener
3 - Plastic clips
4 - Connector
5 - Upholstery clips (6x)
6 - Connector
7 - All-round fastening strips
8 - Cover and padding
♦ Removing
– Use an awl -V.A.G 1636
A- -1- to carefully prise
the fasteners -2- out of
the plastic clips -3-.
– Detach the cover from
the padding.
♦ Installing
– Fit the cover in the re‐
verse order of removal.
– Replace damaged plas‐
tic clips -3-.
– Start by pressing the
fasteners -2- of the
transverse rods into the
plastic clips -3-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.2 Removing and installing cover and pad‐
ding for individual rear seat
3.2.1 Detaching cover and padding from indi‐
vidual rear seat
Special tools and workshop equipment required
General body repairs, interior - Edition 07.2011
3. Covers and padding for electrically operated individual rear seats
Audi A8 2003 ➤
379