Removing And Installing Seat Heating Element (Sports Seat); Removing And Installing Seat Side Padding Heating Elements (Bonded); Removing And Installing Seat Side Padding Heating El- Ements (Bonded); Removing And Installing Seat Heating Element - Audi A8 2003 Workshop Manual

1.7 Removing and installing seat heating el‐
ement (sports seat)
Note
The centre section seat heating element -1- is stitched to the cov‐
er. The cover must be replaced if the heating element is defective.
– Remove the seat ⇒ page 282
– Attach the holder for seat repair -VAS 6136- to the engine and
gearbox holder -VAS 6095- .
– Attach the front seat to the holder for seat repair -VAS 6136- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Remove the backrest
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove the seat pan cover and padding
– Replace the cover with seat heating element.
1.8 Removing and installing seat side pad‐
ding heating elements (bonded)
– Remove the seat ⇒ page 282
– Attach the holder for seat repair -VAS 6136- to the engine and
gearbox holder -VAS 6095- .
– Attach the front seat to the holder for seat repair -VAS 6136- .
– Remove the backrest
– Remove the seat pan cover and padding
– Remove the side padding
– Cut off the cables -1- (2x) at the locations marked -A- (2x).
– Align the heating elements -2- (2x) on the seat side padding
-3- (2x), detach the backing and bond the heating elements
onto the surface of the padding.
.
⇒ page 288 .
⇒ page 360
.
⇒ page 288 .
⇒ page 360
⇒ page 363 .
1. Front seat covers and padding (memory seat, electrically operated seat)
General body repairs, interior - Edition 07.2011
.
.
Audi A8 2003 ➤
367