LXE VX8 Reference Manual page 181

FreeFloat WLinq
Add Criteria – dialog box
In this dialog box you define a new criteria. Note that you can define only one length criteria per
data editing format. If you try to define more than one, an error message will be displayed when
you click OK.
Length
Choose this to define a length criteria.
String
Choose this to define an expression criteria.
Min
The minimum length of the input data string.
Max
The maximum length of the input data string.
Start position
The position in the input data string where the scan for the string expression starts.
Expression
The string expression that should be matched. Control character mnemonics and <\xNN> format
can be used.
EAN128
Choose this to define a EAN128 criteria.
Fields that must be present
Specifies the EAN128 fields that must be present in the data string for this criteria to match. Enter
a single field identifier or a list of field identifiers separated by a comma. For example: 20,37
Fields that must NOT be present
Specifies the fields that if they are present, will make the critera not to match the data string. The
same rules apply as for Fields that must be present.
Click on OK to confirm any changes you've made or click on Cancel to cancel any changes.
E-EQ-VX8RG-A
171
VX8 Reference Guide