Mazda 0000-8F-Z80 Installation Instructions Manual page 20

GPS & TEL
Antenna Cables
Electrical
tape
Vehicle
harness
2 x Wire Ties
(White)
MMS Harness
LED
51. Bundle up the excess Antenna Cables and secure with
Electrical tape.
52. Secure the bundled up Antenna Cable to the vehicle
harness using 2 wire ties (white).
53. Connect the LED to the MMS Harness 2P White connector.
Complete Section 9 {MMS Registration Procedure}
& Section 10 {MMS Check Mode} before proceeding
to Section 11 {Reinstallation/Inspection}
20