General Specifications - Yamaha EMX5000-12 Service Manual

SPECIFICATIONS
General specifications
Maximum output power
Frequency response
Total harmonic distortion
Hum & noise
(Average, Rs=150Ω)
(with 20 Hz–20 kHz BPF)
Maximum voltage gain
Crosstalk at 1 kHz
Input channel equalization
ST Input channel equalization
CH peak indicators
CH signal indicators
Meters
Power amp select switch
Limiter
LIMIT indicators
Graphic equalizer
Internal digital effect 1
Internal digital effect 2
Foot switch (FC5)
Protection circuit (Power amp)
Fan circuit
Phantom power
Option
Power requirement/
Power consumption
Dimensions (WxHxD)
Weight
Accessories
SPEAKERS: 500 W+500 W/4Ω @0.5% THD at 1 kHz
325 W+325 W/8Ω @0.5% THD at 1 kHz
BRIDGE: 1000 W/8Ω
20 Hz–20 kHz +1 dB, –3 dB @1 W output into 8Ω (SPEAKERS OUT)
20 Hz–20 kHz +1 dB, –3 dB @+4 dB output into 600Ω
(ST OUT, ST SUB OUT, MONO OUT, AUX SEND, EFFECT SEND)
Less than 0.5% @20 Hz–20 kHz, 250 W output into 4Ω (SPEAKERS OUT)
Less than 0.3% @20 Hz–20 kHz, +14 dB output into 600Ω
(ST OUT, ST SUB OUT, MONO OUT, AUX SEND, EFFECT SEND)
–128 dB equivalent input noise, –65 dB residual output noise (SPEAKERS OUT)
–95 dB residual output noise (ST OUT, ST SUB OUT, AUX SEND)
–84 dB (ST OUT, MONO OUT)
–64 dB (68 dB S/N)
(ST OUT, MONO OUT)
–81 dB (AUX SEND)
–80 dB (EFFECT SEND)
108 dB INPUT A/B to SPEAKERS OUT
84 dB INPUT A/B to ST OUT, MONO OUT
80 dB INPUT A/B to AUX SEND (PRE)
90 dB INPUT A/B to AUX SEND (POST)
78 dB INPUT A/B to EFFECT SEND
58 dB ST CH IN to ST OUT
68 dB adjacent input, 68 dB input to output
±15 dB Maximum
HIGH 10 kHz shelving*
MID 250 Hz–5 kHz peaking
LOW 100 Hz shelving*
* Turn over/roll off frequency of shelving: 3 dB below maximum variable level.
±15 dB Maximum
HIGH 10 kHz shelving*
MID 2.5 kHz peaking
LOW 100 Hz shelving*
* Turn over/roll off frequency of shelving: 3 dB below maximum variable level.
Red LED on each channel lits when POST EQ signal reaches the level –3 dB below clipping.
Green LED on each channel lits when POST EQ signal reaches the level –10 dB.
13 points LED meter
500W + 500W, 300W + 300W, 100W + 100W
Comp. : THD≥0.5% (SPEAKERS OUT)
Turn on : THD≥0.5% (SPEAKERS OUT)
9 bands (63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz), ±12 dB Maximum
16 programs, parameter control
16 programs, parameter control, tap delay control, foot switch (DIGITAL EFFECT ON/OFF, TAP)
Digital effect 2 mute: on/off, Tap delay
POWER switch on/off mute, DC detection, TEMP (heatsink temp. ≥90°C)
stop — low speed (50°C) — variable — high speed (70°C)
+48 V (balanced input)
FC5 (Foot switch), RK-124 (EMX5000-12)
USA and Canada:120 V AC 60 Hz, 400 W
Europe: 230 V AC 50 Hz, 550 W
Other: 240 V AC 50 Hz, 550 W
682 × 158 × 538 mm (EMX5000-20) / 478 × 158 × 538 mm (EMX5000-12)
19 kg (EMX5000-20) / 15 kg (EMX5000-12)
Power cord, Owner's Manual
@0.5% THD at 1 kHz
ST master/MONO master fader at nominal level and all chan-
nel On switches off and all channel fader at minimum.
ST master fader at nominal level and one channel On switch
on and one channel fader at nominal level and one channel
Gain control at nominal level.
Master fader at nominal level and all channel On switches off
and all channel level control at minimum.
All channel level control at minimum.
EMX5000-12/20
3