Input Specifications; Output Specifications - Yamaha EMX5000-12 Service Manual

EMX5000-12/20
Input specifications
Gain
Input terminals
control
–60
CH INPUT A
(CH1–8/1–16)
–16
–60
CH INPUT B
(CH1–8/1–16)
–16
–34
ST INPUT
(CH9–12/17–20)
+10
ST SUB IN (1, 2)
2TR IN (L, R)
INSERT IN (CH1–8/1–16)
POWER AMP IN (A, B)
1. Sensitivity is the lowest level that can produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum gain.
(All fader and level controls are at maximum position.)
2. Balanced. (T=HOT, R=COLD, S=GND)
3. Unbalanced.
In these specifications when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced to 1 Vrms.
Output specifications
Output terminals
ST OUT (L/R)
ST SUB OUT (L/R)
MONO OUT
AUX SEND 1, 2
EFFECT SEND 1, 2
REC OUT (L/R)
INSERT OUT (CH1–8/1–16)
PHONES (L/R)
SPEAKERS 1 (A, B)
SPEAKERS 2 (A, B)
1. Unbalanced.
2. Impedance balaned. (T=HOT, R=COLD, S=GND)
• In these specifications when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced 1 Vrms.
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 70A
Conformed Environment: E1, E2, E3 and E4
4
Actual load For use with
impedance nominal
–80 dB (0.078 mV) –60 dB (0.775 mV) –40 dB (7.75 mV)
5 kΩ 50–600Ω Mics
–80 dB (0.078 mV) –60 dB (0.775 mV) –40 dB (7.75 mV) PHONE JACK
50 kΩ
600Ω Lines
10 kΩ
–26 dBV (50.1 mV)
Actual source For use with
impedance nominal
150Ω 600Ω Lines
600Ω 10 kΩ Lines
100Ω 40Ω Lines
0.1Ω 4/8Ω Speakers
Input level
1
Nominal
Sensitivity
–36 dB (12.3 mV) –16 dB (123 mV)
–36 dB (12.3 mV) –16 dB (123 mV)
–54 dB (1.55 mV) –34 dB (15.5 mV)
–10 dB (245 mV) +10 dB (2.45 V)
–12 dB (195 mV) +4 dB (1.23 V)
–10 dBV (316 mV)
–20 dB (77.5 mV) 0 dB (0.775 V)
–12 dB (195 mV) +4 dBV (1.23 V)
Output level
Nominal
+4 dB (1.23 V)
–10 dBV (316 mV)
0 dB (775 mV)
3 mW
100 W/4Ω
Connectors on
Max. before clip
XLR-3-31 type
+4 dB (1.23 V)
(TRS)
+4 dB (1.23 V)
–14 dB (155 mV)
+30 dB (24.5 V)
PHONE JACK
+20 dB (7.75 V)
+10 dBV (3.16 V) PHONO JACK
+20 dB (7.75 V)
PHONE JACK
+18 dB (6.16 V)
PHONE JACK
Connectors on mixer
Max. before cliping
+20 dB (7.75 V)
PHONE JACK
+10 dBV (3.16 V)
PHONO JACK
+20 dB (7.75 V)
PHONE JACK
75 mW
PHONE JACK (TRS)
SPEAKON
500 W/4Ω
PHONE JACK
mixer
2
2
3
3
3
3
1
1
1
2
1