General Spec; Specifications (総合仕様 - Yamaha O1V 96 Service Manual

Digital mixing console
Table of Contents

Advertisement

01V96
SPECIFICATIONS

General Spec

(一般仕様)
Number of scene memories
Sampling Frequency
Signal Delay
Fader
Fader Resolution
Total Harmonic Distortion
(CH INPUT to STEREO OUT)
(Input Gain=Min.)
Frequency Response
(CH INPUT to STEREO OUT)
Dynamic Range
(maximum level to noise level)
*2
Hum & Noise
(20 Hz–20 kHz)
Rs=150
Maximum Voltage Gain
Crosstalk
(@ 1 kHz)
Input Gain=Min.
AD Input (1–12)
AD Input (13–16)
4
Downloaded from
www.Manualslib.com
(総合仕様)
99
Internal
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Normal rate: 44.1 kHz–10% to 48 kHz+6%
External
Double rate: 88.2 kHz–10% to 96 kHz+6%
fs=48 kHz
Less than 1.6 ms CH INPUT to STEREO OUT
fs=96 kHz
Less than 0.8 ms CH INPUT to STEREO OUT
100 mm motorized with touch sense × 17
+10 to –138, – ∞ dB input faders
0 to –138, – ∞ dB master faders, stereo fader
Less than 0.05% 20 Hz–20 kHz @ +14 dB into 600 Ω
*1
fs=48 kHz
Less than 0.01% 1 kHz @ +24 dB into 600 Ω
Less than 0.05% 20 Hz–40 kHz @ +14 dB into 600 Ω
fs=96 kHz
Less than 0.01% 1 kHz @ +24 dB into 600 Ω
20 Hz–20 kHz, 0.5, –1.5 dB @ +4 dB into 600 Ω
fs=48 kHz
20 Hz–40 kHz, 0.5, –1.5 dB @ +4 dB into 600 Ω
fs=96 kHz
110 dB typ. DA Converter (STEREO OUT)
105 dB typ. AD+DA (to STEREO OUT) @ fs=48 kHz
105 dB typ. AD+DA (to STEREO OUT) @ fs=96 kHz
–128 dB Equivalent Input Noise
–86 dB residual output noise. STEREO OUT (STEREO OUT off)
Input Gain=Max.
–86 dB (90 dB S/N) STEREO OUT
Input Pad =0 dB
(STEREO fader at nominal level and all CH INPUT faders at minimum level)
Input Pad =0 dB
–64 dB (68 dB S/N) STEREO OUT
Input Sensitivity
(STEREO fader at nominal level and one CH INPUT fader at nominal level)
=–60 dB
74 dB CH INPUT (CH1–12) to STEREO OUT/OMNI (BUS) OUT
40 dB CH INPUT (CH13–16) to STEREO OUT
74 dB CH INPUT (CH1–12) to OMNI (AUX) OUT (via pre input fader)
74 dB CH INPUT (CH1–12) to MONITOR OUT (via STEREO BUS)
80 dB adjacent input channels (CH1–12)
80 dB adjacent input channels (CH13–16)
80 dB input to output
Phantom switch
+48 V DC (each 4ch)
Pad switch
0/20 dB attenuation
Gain control
44 dB (–60 to –16), detented
LED (red) turns on when post HA level reaches 3 dB below clipping at dig-
Peak indicator
ital domain
LED (green) turns on when post HA level reaches 20 dB below nominal at
Signal indicator
digital domain
24-bit linear, 128-times oversampling (fs=44.1, 48 kHz), 64-times over-
AD converter
sampling (fs=88.2, 96 kHz)
Gain control
30 dB (–26 to +4), detented
LED (red) turns on when post HA level reaches 3 dB below clipping at dig-
Peak indicator
ital domain
LED (green) turns on when post HA level reaches 20 dB below nominal at
Signal indicator
digital domain
24-bit linear, 128-times oversampling (fs=44.1, 48 kHz), 64-times over-
AD converter
sampling (fs=88.2, 96 kHz)
Input selector
CH15/16/2TR IN for CH15/16
manuals search engine

Advertisement

Table of Contents
loading

Table of Contents