Optional Equipment
Accent Light Connection to Omega Remote
If using the accent light with an Omega remote, you will want to remove and discard the accent light
rheostat and wiring harness. Plug the wiring harness (included with the blower) into the junction box
on the fireplace. The leads from the accent light are connected to the leads from the Omega remote.
Accent Light Leads
© Travis Industries
(for qualified installers only)
The molex connector on the blower wiring harness
plugs into the molex connector on the junction box.
The accent light rheostat and wiring harness are not
needed when using the Omega remote.
4080207
Remote Accent Light Leads
(orientation does not matter)
5 1
100-01185_000