Travis Industries 21 TRV Installation Manual page 12

1 2
Converting the Fireplace to Rear Vent (continued)
Insert the small piece of insulation into the exhaust
duct. Tuck it into the cavity so it lays flat.
Remove the flue collar suport, rotate it 180°, and re-attach it to the fireplace.
© Travis Industries
Installation
(for qualified installers only)
Attach the exhaust cover
plate, making sure the
attached gasket seals the
exhaust duct.
Insert the large piece of insulation into
the intake duct. Note how the wider
portion goes to the sides. Tuck it into
the cavity so it lays flat.
4080207 100-01185_000