Checking The Headlight Setting - KTM 2014 1290 Super Duke R EU Owner's Manual

16 ELECTRICAL SYSTEM
16.8

Checking the headlight setting

–
Fold the headlight mask up.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
500331-10
–
Park the vehicle on a horizontal surface in front of a light-colored wall and make a mark
at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
Distance
–
Position the vehicle perpendicular to the wall at a distance
on the low beam.
Guideline
400726-10
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
1
.
B
under the first mark.
B
A
M5 5 Nm (3.7 lbf ft)
5 cm (2 in)
A from the wall and switch
5 m (16 ft)
143